FUTABA T10J - Common Function

38
Common function
（1 second）
＋
END
MENU 1 2 3
▶MDL-SEL
▶MDL-NAME
▶FAIL SAFE
▶REVERSE
▶TIMER
▶SERVO
▶END POINT
▶TRIM
▶SUB TRIM
▶P.MIX1-6
▶AUX-CHAN
▶PARAMETER
MENU 1 2 3
▶TELEMETRY
▶SENSOR
▶SBUS LINK
▶MDL-TRANS
▶TRAINER
▶AIL-DIFF
▶AIL→RUD
▶V-TAIL
▶GYRO SENS
▶ELEVON
▶AILVATOR
▶THR→NEEDL
MENU 1 2 3
▶D/R,EXPO
▶FLAPERON
▶AIR-BRK
▶FLAP→ELE
▶ELE→FLAP
▶FLAP TRIM
▶THR.CUT
▶IDLE DOWN
▶SNAP ROLL
▶THR-CURVE
▶PIT-CURVE
▶THR DELAY
MENU
3/3
Common function
The setting screens are called from the following menu. All the functions common to
airplane, helicopter, glider, and multi-copter model types are shown here.
MENU
● When the + key is pressed for
1 second, the menu screen is
displayed.
● When the END key is
pressed, the display
returns to the home
screen.
● First set the throttle
to slow.
● Then turn on the
power.
MENU
1/3
MENU
2/3
（Home screen）
To menu screen
by holding down
the + key
（Selection）
● Move the cursor
(highlighted) up and
down and to the left and
right with the Jog key and
select the function.
The cursor can be moved
over several pages.
（Calling the setting screen）
● Press the Jog key to open the
setting screen.