FUTABA T10J Manual

86
Common function
This function returns the slot setting and alarm setting of each sensor to their initial value (shipped state).
Various sensors can be used one by one.
*The slot number memorized at each sensor cannot be initialized.
● INITIALIZE
SENSOR SLOT 1 2 3 4 5 6
1▶ SBS-01T *****
3▶ SBS-01A *****
4 SBS-01A
5 SBS-01A
6▶ SBS-01V *****
2▶ SBS-01RM/O *****
① Call the menu screen from the
home screen by pressing the + key
for 1 second.
＋
② Select
from the menu with the Jog
key.
③ Open the setting screen by
pressing the Jog key.
（1 second）
SENSOR SLOT 1 2 3 4 5 6
31 INHBIT
▶ REGISTER
▶ SENS SLOT
▶ INITIALIZE
▶ ALL CLEAR
④
Jog key presses side and makes
it 6 pages
"SENSOR"
Calling the setting screen
① "INITIALIZE" in SENSOR SLOT page
6 is chosen by Jog key.
② Press the Jog key for 1 second.
③ Press the Jog key.
● The initialization is done
when "COMPLETE" is
shown.
Initialize
● Conrmation message
"sure?" blinks.
Left 1-time
press
or
Right 10-
time press

FUTABA T10J Specifications

General

Channels	10
Frequency	2.4GHz
Model Memory	30
Display	LCD
Telemetry	Yes
Weight	590g
Trainer Port	Yes
Modulation	S-FHSS
Power Supply	6V to 7.4V (2S LiPo)