FUTABA T10J - Sensor:register

84
Common function
SENSOR SLOT 1 2 3 4 5 6
1▶ SBS-01T *****
3▶ SBS-01A *****
4 SBS-01A
5 SBS-01A
6▶ SBS-01V *****
2▶ SBS-01RM/O *****
This function registers an additional sensor. Connect the sensor as shown in the gure and register it by
the following procedure. The sensor ID is registered in the transmitter.
Method
● REGISTER（When using multiple telemetry sensors of the same type.）
Sensor connect
① Call the menu screen from the
home screen by pressing the + key
for 1 second.
＋
② Select
from the menu with the Jog
key.
③ Open the setting screen by
pressing the Jog key.
（1 second）
SENSOR SLOT 1 2 3 4 5 6
31 INHBIT
▶ REGISTER
▶ SENS SLOT
▶ INITIALIZE
▶ ALL CLEAR
① "REGISTER" in SENSOR SLOT page
6 is chosen by Jog key.
② Press the Jog key for 1 second.
③ Press the Jog key.
● A confirmation "beep"
sounds when complete.
Sensor register
● "COMU-ERROR" :
When the number of slots
needed in registration is insufficient, an error is
displayed and registration cannot be performed.
Hub
T10J
Receiver battery
Connect a sensor to add
Sensor
"SENSOR"
Calling the setting screen
● Conrmation message
"sure?" blinks.
④
Jog key presses side
and makes it 6pages.
Left 1-time
press
or
Right 10-
time press