FUTABA T10J - AUX Channel

56
Common function
Function
Method
① Call the menu screen from the
home screen by pressing the + key
for 1 second.
＋
② Select
from the menu with the Jog
key.
③ Open the setting screen by
pressing the Jog key.
（1 second）
Calling the setting screen
Auxiliary channel function (AUX-CH): defines
the relationship between the transmitter controls
and the receiver output for channels 5-10.
"AUX-CHAN"
AUX-CHAN
AUX Channel
(Common)
＜ AUX Channel Default ＞
ACROBATIC HELICOPTER GLIDER MULTICOPTER
CH5 SwG（SwitchG） CH5 SwF（SwitchF） CH5 SwG（SwitchG） CH5 SwE（SwitchE）
CH6 VR（Volume） CH6 ----（PITCH） CH6 VR（Volume） CH6 SwC（SwitchC）
CH7 DT5（Trim5） CH7 SwC（SwitchC） CH7 DT5（Trim5） CH7 VR（Volume）
CH8 DT6（Trim6） CH8 VR（Volume） CH8 DT6（Trim6） CH8 DT6（Trim6）
CH9 SwA(SwitchA) CH9 SwA(SwitchA) CH9 SwA(SwitchA) CH9 SwA(SwitchA)
CH10 SwD(SwitchD) CH10 SwD(SwitchD) CH10 SwD(SwitchD) CH10 SwD(SwitchD)
① A channel is chosen by Jog key.
Selection range：5 〜 10ch
② Select the "SW" item and then select the switch
by pressing the + key or – key.
＋ －
or
Selection range：NULL, SwA 〜 SwH,
VR, DT5, DT6
AUX Channel
Remember that if you assign primary control of
a channel to a switch which you later use for other
functions (like dual/triple rates or airbrakes), every
time you use that other function you will also be
moving the auxiliary channel.
AUX-CHAN
CH5 ▶ SwG
CH6 ▶ VR
CH7 ▶ DT5
CH8 ▶ DT6
CH9 ▶ SwA
CH10 ▶ SwD