FUTABA T10J Manual

146
Helicopter
Function
Method
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
② Select
from the menu with the
Jog key.
③ Open the setting screen by
pressing the Jog key.
（1 second）
Calling the setting screen
This mixing compensates for slowing of the
helicopter when the ailerons, elevators, and rudder
are operated.
●The compensation amount can be set for each
condition.
●The correction amount limits the throttle hold point
5 (or highest point) operation.
"THR-MIX"
THR-MIX
Throttle mixing
(HELICOPTER)
■ Activating the function
① Select the "MIX" item and then select the
"ON" by pressing the + key or – key.
＋ －
or
● When you do not use a function, set to
the "INH" side.
■ Setup of rate
＋ －
or
②
Select each function item
of "MIX" and set the rate by
pressing the + key or – key.
Range：0 ～ 100%
（RUD → THR : -100 ～ +100%）
Default：0%
● When you want to return the set value to the initial
value, press the + key and – key simultaneously.
● The setting condition can be selected by pressing
the Jog key at rate adjustment.
Range：NORM, IDL1, IDL2, IDL3
Throttle mixing
Activating the function
Condition
Mixing
● When not using this function,
select INH.
（Present condition）
● Select the setting item
with the Jog key.
（Rate）
THR-MIX

FUTABA T10J Specifications

General

Channels	10
Frequency	2.4GHz
Model Memory	30
Display	LCD
Telemetry	Yes
Weight	590g
Trainer Port	Yes
Modulation	S-FHSS
Power Supply	6V to 7.4V (2S LiPo)