FUTABA T10J - Sensor:sens Slot

85
Common function
This procedure changes the slot number of one registered sensor.
● SENS SLOT
Sensor connection
Hub
T10J
Receiver battery
Connect a sensor to add
Sensor
① "SENS SLOT" in SENSOR SLOT page
6 is chosen by Jog key.
② Jog key press.
Calling the setting screen
SENSOR SLOT SETTING
READ
START SLOT = ＊＊ → 1
SLOT LENGTH = ＊＊
ID = ＊＊＊＊＊
TYPE= －－－－
●Once the sensor is read correctly, the Sensor
ID will be displayed
● READ is chosen and Jog
key is pressed → "sure?"
→ Jog key is pressed.
● Number is chosen, Input a
number by the ＋ key or －
key.
● "COMU-ERROR" when
reading goes wrong.
*Referred to
＜ Assignable slot ＞