FUTABA T10J Manual

61
Common function
① Select the "TYPE" item and
then select the model type by
pressing the + key or – key.
＋ －
or
● The new model type is
displayed on the screen.
② Press the Jog key for 1 second.
（1 second）
● Confirmation message
"sure?" blinks.
③ Model type change by pressing
the Jog key.
● A confirmation "beep"
sounds is complete.
For safety, a double setting system is used. You need to conrm your
setting changes by pressing the jog key. If you fail to press the jog key
and see "COMPLETE" on your screen, your changed are not saved.
Selection range：
ACROBATIC,
HELICOPTER,GLIDER,MULTI
COPT
Model type
① Select the "SWASH" item and
then select the swash type by
pressing the + key or – key.
＋ －
or
② Press the Jog key for 1 second.
（1 second）
● Confirmation message
"sure?" blinks.
③ Swash type change by pressing
the Jog key.
● A confirmation "beep"
sounds is complete.
For safety, a double setting system is used. You need to conrm your
setting changes by pressing the jog key. If you fail to press the jog key
and see "COMPLETE" on your screen, your changed are not saved.
Selection range：H-1, HR3,
H-3, HE3, HN3, H-2, H-4, H4X
① Select the "WING" item and
then select the swash type by
pressing the + key or – key.
＋ －
or
② Press the Jog key for 1 second.
（1 second）
● Confirmation message
"sure?" blinks.
③ Swash type change by pressing
the Jog key.
● A confirmation "beep"
sounds is complete.
For safety, a double setting system is used. When a change is cancelled
after the conrmation message is displayed, the change is not made
when moved to another setting item by Jog key.
Selection range：1AIL, 2AIL,
2A+1F, 2A+2F, 2A+4F
Swash type（for Heli）
Wing type（for Glider）
① Select the "ATL" item and change the mode by
pressing the + key or – key.
＋ －
Selection range：ON, OFF
Default：OFF
ATL Trim ON/OFF
or

FUTABA T10J Specifications

General

Channels	10
Frequency	2.4GHz
Model Memory	30
Display	LCD
Telemetry	Yes
Weight	590g
Trainer Port	Yes
Modulation	S-FHSS
Power Supply	6V to 7.4V (2S LiPo)