FUTABA T10J - Condition

157
Glider
Function
Method
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
② Select
from the menu with the
Jog key.
③ Open the setting screen by
pressing the Jog key.
（1 second）
Calling the setting screen
1AIL 2AIL 2AIL+1F 2AIL+2F 2AIL+4FWING TYPE
・
Aileron→Rudder
・
Rudder→Aileron
・
Camber FLP
・
Camber MIX
・
Buttery
・
Camber→ELE
・
ELE→Camber
・
AIL→Camber
・
AIL→BRKFL
・
Trim mix
The condition function lets you change multiple
settings by one switch operation. Different
settings can be made immediately by switching 2
conditions.
●The functions that can be changed by condition
are:
"CONDITION"
CONDITION
Condition
(GLIDER)
■ Activating the function
＋ －
or
① Select the "INH" item of the
condition you want to use and
then set that condition to "ON" or
"OFF" by pressing the + key or –
key.
● Set conditions you do not want to use to "INH".
（Changing the switch）
■ Switch selection
＋ －
or
② Change the switch by
pressing the + key or
– key at the switch
selection item.
Range：SwA ～ SwH
Default：SwA
■ Switch direction
＋ －
or
③ Select the ON direction
by pressing the + key or
– key at the ON direction
selection item.
Range：
● 2P SW：NULL, UP, DOWN
● 3P SW：NULL, UP, UP&D, UP&C, CNTR, C&DN,
DOWN
CONDITION
Condition1
Condition2
● When not using this
Function select INH.
The display of On/Off is
shown when active and
assigned to a switch.
● Select the setting item
with the Jog key.
● Priority is given to the
condition 2 when the
condition 1 and 2 is turned on
simultaneously.
CONDITION
1 ▶ INH ▶ SWA ▶ DOWN
2 ▶ INH ▶ SWA ▶ DOWN
（Activating the function） （Switch direction）
（Switch selection）