98
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
② Select
from the menu with the
Jog key.
③ Open the setting screen by
pressing the Jog key.
（1 second）
Calling the setting screen
■ Activating the function
① Select the "MIX" item and then select
the "ON" by pressing the + key or –
key.
＋ －
or
● When you do not use a function, set
to the "INH" side.
■ Mixing rate
＋ －
or
② Select the "RATE" item and
then adjust the mixing rate by
pressing the + key or – key.
Range：-100 ～ +100%
Default：+50%
● When you want to return the set value to the initial
value, press the + key and – key simultaneously.
However, polarity does not return.
Aileron → Rudder Mixing
Use this mix when you want to mix the rudders
with aileron operation. This allows the aircraft to
bank at a steep angle.
●When the linkage direction is reversed by the
linkage, adjustments can be made by changing
the rate polarity.
"AIL → RUD"
AIL → RUD
Aileron → Rudder mixing
(ACROBATIC)
Activating the function
Mixing rate
● When not using this function,
select INH.
● Select the setting item
with the Jog key.
AIL → RUD
To Next Page
Loading...
