FUTABA T10J - User Name

44
Common function
① Move the cursor to the user name
digit you want to change by
pressing the + key or – key.
＋ －
or
② Move the cursor to the
candidate character you
want to change with the
Jog key.
③ Change the character by pressing
the Jog key.
Set the user name by repeating steps ① to ③ above.
Reset method: When the cursor is moved to any digit of the user name by + key or – key and the Jog
key is pressed in the state in which the cursor was moved to RESET by Jog key, the user name returns
to its initial setting (Futaba logo).
User name
①
Select "HOME-DSP" from the
parameter 2 page with the Jog key.
② Select "USR-NAME" b y
pressing the + key or – key.
③ End setting by pressing the
END key.
Parameter
＋ －
END
① Call the menu screen from the
home screen by pressing the + key
for 1 second.
＋
② Select
from the menu with the Jog
key.
③ Open the setting screen by
pressing the Jog key.
（1 second）
Calling the setting screen
Displaying the user name on the home screen
The set user name can be displayed on the home screen. (When a user name is not set, the Futaba logo is
displayed.) When the home screen display is changed to USR-NAME by PARAMETER, the set user name is
displayed.
"PARAMETER"