FUTABA T10J Manual

87
Common function
This function sets all the slots to INH. Sensors cannot be used even if connected to the receiver. All the
alarm settings of each sensor are also cleared.
*The slot number memorized at each sensor is not initialized.
● ALL CLEAR
SENSOR SLOT 1 2 3 4 5 6
1▶ SBS-01T *****
3▶ SBS-01A *****
4 SBS-01A
5 SBS-01A
6▶ SBS-01V *****
2▶ SBS-01RM/O *****
① Call the menu screen from the
home screen by pressing the + key
for 1 second.
＋
② Select ③ Open the setting screen by
pressing the Jog key.
（1 second）
SENSOR SLOT 1 2 3 4 5 6
31 INHBIT
▶ REGISTER
▶ SENS SLOT
▶ INITIALIZE
▶ ALL CLEAR
from the menu with the
Jog key.
④
Jog key presses side and makes
it 6 pages
Left 1-time
press
or
Right 10-
time press
"SENSOR"
Calling the setting screen
① "ALL CLEAR" in SENSOR SLOT page
6 is chosen by Jog key.
② Press the Jog key for 1 second.
③ Press the Jog key.
● The clearing is done
when "COMPLETE" is
shown.
All clear
● Conrmation message
"sure?" blinks.

FUTABA T10J Specifications

General

Channels	10
Frequency	2.4GHz
Model Memory	30
Display	LCD
Telemetry	Yes
Weight	590g
Trainer Port	Yes
Modulation	S-FHSS
Power Supply	6V to 7.4V (2S LiPo)