FUTABA T10J - Battery Alarm Voltage Vibration; Buzzer Tone; Jog Key Navigation; Jog Light

63
Common function
① Select the "BATT VIB" item and change the ON or
OFF by pressing the + key or – key.
＋ －
or
● ON ⇒ The battery alarm of a transmitter is told with
vibration.
Selection range：
ON, OFF
Battery alarm voltage vibration
① Select the "BUZ-TONE" item and change the
numerical value (tone) by pressing the + key or –
key. The higher the numerical value the higher the
tone.
Buzzer tone
Selection range：
OFF, 1 〜 100
● When you want to return the
set value to the initial value,
press the + key and – key
simultaneously.
＋ －
or
① Select the "Jog-NAVI" item and change the mode
by pressing the + key or – key.
＋ －
or
Selection range：
ON,OFF
When NAVI selected
Jog key navigation
When a function that
only operates in the
vertical direction is
selected, the LED
blinks vertically.
When a function
that operates in
the vertical and
horizontal directions
is selected, the LED
blinks vertically and
horizontally.
ashes when the Jog key was pressed.
① Select the "Jog-LIT" item and change the mode by
pressing the + key or – key.
＋ －
or
● "ALWAYS"：The light is always switched on.
"KEY-ON"：KEY operation → Light on.
"OFF"：Always o󱐯.
Selection range：
ALWAYS, KEY-ON, OFF
Default：KEY-ON
Jog light