139
■ Activating the function
＋ －
or
① Select the "MIX"
item and then
select the "ON" by
pressing the + key
or – key.
● When you do not use a function, set to
the "INH" side.
■ Selection of condition
＋ －
or
② Select the "CND" item and
selection of condition by
pressing the + key or –
key.
Range：NORM, IDL1/2, IDL3
■ Setup of rate
＋ －
or
③
Select each function item of "HI"or
"LO" and set the rate by pressing the
+ key or – key.
Range：-100 ～ +100%
Default(NORM)：-20%(LOW)、+20%(HIGH)
Default(IDL1/2/3)：0%(LOW)、0%(HIGH)
● When you want to return the set value to the initial value,
press the + key and – key simultaneously.
Pitch → Ruddermixing
Activating the function
Selection of condition
High side Setup of rate
Low side Setup of rate
● When not using this function,
select INH.
（present switch position ）
● Select the setting item
with the Jog key.
（Rate）
REVO.MIX
To Next Page
Loading...
