59
Battery alarm（BATT-ALM）
Select the battery alarm voltage according to the battery to be used.
● 4 dry cell batteries ⇒ 4.2V DRY4
● HT5F1800B (NiMH battery) ⇒ 5.0V NiMH5
● FT2F2100B (Lithium ferrite battery) ⇒ 5.8V LiFe2
Battery alarm vibration（BATT VIB）
Battery alarm is told with vibration.
Buzzer tone （BUZ-TONE）
The tone of buzzer sound when a key is pressed.
● Set up range : OFF,1(low) 〜 100(high)
Jog key navigation （Jog-NAVI）
Blink at the time of Jog key operation, Display of the operation direction.
Jog light（Jog-LIT）
ON/OFF of a Jog key light.
Jog light time（Jog-TIME）
Time setting in which a Jog key light shines.
● Set up range : 1 〜 30(s)
Telemetry mode setting（TELEMETRY MODE）
Sets whether or not telemetry is activated. When using 2 receivers with 1 transmitter, select INH.
● Range：ACT / INH
Telemetry display units setting（TELEMETRY UNIT）
Sets whether the telemetry display is in meters or yards/pounds.
● Range：METER / YARD （℃ / ℉）
Speech language setting（SPEECH LANGUAGE）
Sets the speech language when listening to telemetry information through earphones.
● Range：Japanese (JPN), English (English), German (Deutsch)
Speech volume setting（SPEECH VOLUME）
Sets the volume when listening to telemetry information through earphones.
● Range：LOW / HIGH
Stick position alarm setting（STK POSI ALRM）
Can be set so that an audible alarm sounds once when the throttle stick reaches the set position.
To Next Page
Loading...
