71
In the initial state, the EXT-voltage maximum and minimum values are displayed at the transmitter.
(Value until reset)
① Select "EXT-VOLT" from the
telemetry screen with the Jog key.
② Open the setting screen by
pressing the Jog key.
① In the EXT-VOLT screen state, select
(MIN/MAX) from the menu with the
Jog key.
② Date reset by pressing the
Jog key for 1 second.
● A confirmation "beep"
sounds is complete.
Calling the setting screen
MIN/MAX reset
● EXT-Voltage MIN/MAX
EXT-VOLT
(ALARM) (VIB) (LIMIT)
DN▶INH ▶OFF ▶ 0.0V
SPEECH▶ INH SW▶ NULL
0.0V
MIN/MAX= 0.0V / 0.0V
EXT-Voltage MIN
EXT-Voltage MAX
EXT-Voltage display
To Next Page
Loading...
