96
MENU1/3
MDL-SEL (P.40)
Model select ／ Model Copy ／ Data
reset ／ RX ／ Link
MDL-NAME (P.43)
Model name ／ User name
FAIL SAFE (P.45)
Fail safe
REVERSE (P.47)
Servo reverse
TIMER (P.48)
Timer
SERVO (P.49)
Servo monitor ／ Servo test
END POINT (P.50)
End point
TRIM (P.51)
Trim reset ／ Trim step
SUB TRIM (P.52)
Sub trim
P.MIX1-6 (P.53)
Program mixing 1 〜 6
AUX-CHAN (P.56)
AUX channel
PARAMETER (P.58)
Data reset ／ Model type ／ ATL-
trim ／ LCD contrast ／ Back light :
mode, time, adjustment ／ Home
display ／ Battery alarm ／ Battery
vibration ／ Buzzer tone ／ Jog
navi ／ Jog light ／ Jog time ／
Telemetry : mode, unit ／ Speech :
language, volume ／ Stick position
alarm
■ Function
MENU2/3
TELEMETRY (P.66)
Telemetry Display ／ Alarm setup
SENSOR (P.83)
Telemetry sensor
SBUS LINK (P.89)
S.BUS servo set up
MDL-TRANS (P.92)
Data transfer of another 10J or 8J
TRAINER (P.93)
Trainer
AIL-DIFF (P.97)
Aileron Dierential
AIL → RUD (P.98)
Aileron → Rudder
V-TAIL (P.99)
V-Tail
GYRO SENS (P.100)
Gyro mixing
ELEVON (P.101)
Elevon
AILVATOR (P.102)
Ailvator
THR → NEEDL (P.103)
Throttle → Needle Mixing
MENU3/3
D/R, EXPO (P.104)
Dual rate ／ EXPO
FLAPERON (P.106)
Flaperon
AIR-BRK (P.108)
Air brake
FLAP → ELE (P.110)
Flap → Elevator mixing
ELE → FLAP (P.111)
Elevator → Flap mixing
FLAP TRIM (P.112)
Flap trim
THR.CUT (P.113)
Throttle cut
IDLE DOWN (P.115)
Idle down
SNAP ROLL (P.116)
Snap roll
THR-CURVE (P.117)
Throttle curve
PIT-CURVE (P.118)
PIT-curve
THR DELAY (P.119)
Throttle delay
key ／ LCD
●Jog key
●－ key●
＋ key
●
END key
Refer to "Common Functions"
previously described for a
description of this function.
To Next Page
Loading...
