Pub. 42004-550C
Elemec3 Console Manual—Version 3 Page 46 of 109
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-550C.docx
07/21
Types of I/O controllers:
• E3 Internal I/O—8 unsupervised NO inputs and 8 unsupervised outputs (IP controller only)
• Elemec I/O Controller—16 unsupervised inputs and up to 16 unsupervised outputs.
• Monitored Input Module—8 optionally supervised inputs.
• Monitored Relay Module—8 relay outputs with 8 optionally supervised inputs.
• Beacon Monitor—8 supervised outputs with monitoring for power distribution circuits.
• IP Monitored Input Module—8 optionally supervised inputs.
• IP Monitored Relay Module—8 relay outputs with 8 optionally supervised inputs.
• IP Strobe Monitor—8 supervised outputs with monitoring for power distribution circuits
Set as default—Select this option to automatically add the same controller type when adding additional
controllers.
I/O Controller Properties
Figure 50. E3 Internal I/O Properties (IP Controller Only)
To Next Page
