Pub. 42004-550C
Elemec3 Console Manual—Version 3 Page 69 of 109
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-550C.docx
07/21
Available Destinations Pane
Select each destination type to include in the zone’s outputs from the AVAILABLE DESTINATIONS drop-
down list. The destinations for the selected destination type appear in the list. The types of available
destinations are; AMPLIFIER CHANNELS, ZONES CONFIGURED, OUTPUTS, OUTPUT GROUPS, LOGIC
FLAGS, IP DESTINATIONS, SP2 RELAY GROUPS, and MODBUS OUTPUTS.
Assigned Audio Destinations Pane
Amplifier Channels—add amplifier channels to this zone. Select AMPLIFIER CHANNELS from the
AVAILABLE DESTINATIONS list on the left and click the right-arrow button to move selected amplifier
channels to the ASSIGNED AUDIO DESTINATIONS list on the right.
Zones Configured—add previously defined zones to this zone. Select ZONES CONFIGURED from the
AVAILABLE DESTINATIONS list on the left and click the right-arrow button to move selected zones to the
ASSIGNED AUDIO DESTINATIONS list on the right.
IP Destinations—add previously defined IP destinations to this zone. Select the IP DESTINATIONS from
the AVAILABLE DESTINATIONS list on the left and click the right-arrow button to move IP destinations to
the ASSIGNED AUDIO DESTINATIONS list on the right.
Output/Logic Flags Assigned Pane
To add outputs, output groups, or logic flags to this zone, select the destination type from the AVAILABLE
DESTINATIONS drop down list then select the items from the list on the left and click the right-arrow
button to move the items to the OUTPUTS/LOGIC FLAGS ASSIGNED list. Items included in the list assert
only when the event includes the item and the event is targeting this zone.
Playback Audio
Playback audio is any prerecorded audio in MP3 format for broadcast by the system (i.e., alarm audio,
informational messages, tones, etc.).
• Use the PLAYBACK AUDIO CONFIGURATION screen to create and manage prerecorded clips, configure
system tones, background music, and create messages from the audio clips.
• The screen contains three panes:
• PLAYBACK AUDIO CONFIGURATION
• MESSAGES
• MESSAGE PROPERTIES
To Next Page
Loading...
