GE CARESCAPE ONE - NIBP alarms

Non-invasivebloodpressure
NOTE
WhentheAutoInitialInatesettingisenabled,theinitialcuff
inationpressuresaredependentontheselectedcuffsize.
Theinitialtargetpressurepresetcanbeadjustedifyoudesire
alowerorhigherinitialtargetpressure.
SelectingtheinitialNIBPcuffinationpressure
Youcandeterminethecuffinationpressureautomaticallybasedonthecuffsize.
1.SelecttheNIBPparameterwindow>Page2.
2.SelectAutoInitialInate.
SettingthetargetNIBPinationpressure
YoucanmanuallychangethetargetinationpressurefortherstNIBPmeasurement.
1.SelecttheNIBPparameterwindow>Page2.
2.CheckthatAutoInitialInateisnotselected.
3.SelecttheInit.PressuremmHg(orInit.PressurekPa)valuewitharrows.
NIBPvolumeanddisplaysettings
AdjustingtheNIBPmeasurementcompletiontonevolume
1.SelecttheNIBPparameterwindow>Page2.
2.SettheCompletedNIBPVolume.
Thelowerthevalue,thesofterthetone.
SettingtheNIBPdisplayformat
1.SelecttheNIBPparameterwindow>Page2.
2.SelecttheformatfromtheDisplayFormatlist:
●Sys/Dia(Mean):Allvaluesareshown,butthesys/diavaluesareshownina
biggerfont.
●(Mean)Sys/Dia:Allvaluesareshown,butthemeanvalueisshowninabigger
font.
NIBPalarms
SettingNIBPalarms
NOTE
Themostrecentsavedalarmon/offsettingsapplytoallcuff
sizes.
1.SelecttheNIBPparameterwindow.
2.SelecttheAlarmstab.
3.SelectSystolic(SYS),Mean(M),orDiastolic(DIA)pressure.
Ifthefeatureisnotactive,thealarmlimitsaregreyedout.SelectAlarmOnto
setthealarms.
160CARESCAPEONE2094480-001
CARESCAPE ONE User Manual DRAFT 26 October 2017