Need help?Do you have a question about the General Dynamics R2600 Series and is the answer not in the manual?
General| Brand | General Dynamics |
|---|---|
| Model | R2600 Series |
| Category | Measuring Instruments |
| Language | English |
Explains the manual's purpose and scope for using R2600 Series Communication System Analyzers.
Covers general safety precautions, potential hazards, and warnings for operating the analyzer.
Information on service centers, ordering replacement parts, and handling batteries.
Procedures for unpacking, initial setup, and battery pack installation for the analyzer.
Overview of the R2600 Series Communication System Analyzers and their functions.
Details on front panel controls, including keys, indicators, knobs, display, and connectors.
Description of controls located on the bottom of the analyzer unit.
Covers manual scope, basic operation, safety summary, warnings, and cautions.
Details MONITOR, GENERATE, DUPLEX, SWEEP GENERATE, and TRACKING GENERATOR modes.
Explains audio synthesizer, modulation types, and meter/display functions.
Covers Audio Monitor, Calibration, Print Function, Special Functions Menu, and Memory Screens.
Procedures for testing FM transmitters, including setup, power, frequency, and modulation measurements.
Procedures for testing FM receivers, including setup, distortion, SINAD, and sensitivity measurements.
Covers testing RF cables for faults, measuring distances, and testing tone remote functions.
Instructions for configuring the analyzer for printer output via RS-232 serial connection.
Explains the analyzer's trunking option features for Motorola trunked radios.
Details capabilities like dynamic call processing, closed cover measurements, and radio ID decoding.
Defines trunking concepts and describes Trunk I, Trunk I EP II, and Trunk II signaling types.
Covers connecting radios, software versions, general operation, and accessing system test screens.
Steps for accessing trunk mode and performing radio-initiated dispatch, phone interconnect, and call alert tests.
Covers system-initiated tests and configuring radios for different trunking types.
Details on selecting frequency bands, control/voice channels, and port settings.
Basic test setups for common trunked radio tests using the R2670 analyzer.
Covers radio-initiated and system-initiated dispatch test sequences for Trunk I, EP II, and Trunk II.
Procedures for testing phone interconnect and call alert services in various trunking configurations.
Steps for performing system-initiated failsoft tests using the analyzer.
Overview of the R2670 analyzer's Astro Trunking Option for Motorola Astro radios.
Details vocoder capabilities, dynamic call processing, closed cover measurements, and radio ID decoding.
Covers connecting radios, software versions, general operation, and accessing system test screens.
Steps for accessing trunk mode and performing radio-initiated Astro dispatch and affiliation tests.
Details system-initiated dispatch tests and RF zone settings for Astro trunking.
Procedures for configuring radios for Astro signaling, including transmit deviation.
Typical test setups for common trunked radio tests using the R2670 analyzer with Astro Trunking.
Covers radio-initiated and system-initiated dispatch tests for Astro signaling.
Procedures for testing call alert and failsoft scenarios in Astro trunking.
Covers manual purpose, analyzer capabilities, Securenet features, and vocoder/BER testing.
Details the housing and connectors for the Securenet Option, including KVL and Serial ports.
Covers manual purpose, analyzer capabilities, basic operation, and software version checks.
Discusses maintaining high RF signal quality standards for encrypted communications.
Provides definitions for terms used with Securenet radios and test equipment.
Covers manual purpose, analyzer capabilities, basic operation, and software version checks.
Procedures for setting up encryption, selecting algorithms, and programming test or external keys.
Explains MONITOR, GENERATE, DUPLEX modes, and audio/modulation controls.
Details Securenet BER Meter and Clear Scope display functions for monitoring signals.
Procedures for basic Securenet radio testing, including deviation and monitor/generate modes.
Covers BER testing for receivers and transmitters in Generate, Monitor, and Duplex modes.
Using Clear Scope to monitor received and transmitted audio signals.
Introduction to the R2670 analyzer's Astro Option for testing Astro digital radio systems.
Lists Astro Option capabilities, including vocoder, dynamic call processing, and BER testing.
Details the housing and connectors for the Astro Option, including KVL and Serial ports.
Covers manual purpose, analyzer capabilities, basic operation, and handling clear/privacy modes.
Discusses maintaining high RF signal quality standards for Astro encrypted communications.
Provides definitions for terms used with Astro radios and test equipment.
Covers manual purpose, analyzer capabilities, basic operation, and software version checks.
Procedures for setting up encryption, selecting algorithms, and programming test or external keys.
Explains MONITOR, GENERATE, DUPLEX modes, and audio/modulation controls.
Details Astro BER Meter and Clear Scope display functions for monitoring signals.
Procedures for basic Astro radio testing in Monitor and Generate modes.
Covers Astro voice and embedded data transmit tests, and receive tests.
Details BER testing for Astro radios in Generate, Monitor, and Duplex modes.
Using Clear Scope to monitor received and transmitted audio signals.
Introduction to the R2670 analyzer's Project 25 features for digital radio systems.
Lists Project 25 capabilities including voice mode, BER testing, and dedicated test screens.
Details the connectors on the R2670 for Project 25 functionality, including KVL and interface ports.
Introduction to the R2670 analyzer's Project 25 features for servicing digital radio systems.
Explains how the analyzer emulates Project 25 digital environments and handles clear/secure modes.
Discusses maintaining high RF signal quality standards for Project 25 encrypted communications.
Provides definitions for terms used with Project 25 radios and test equipment.
Covers manual scope, basic operation, software versions, and connecting radios.
Procedures for setting up encryption, selecting algorithms, and managing test or external keys.
Details RF modes (MONITOR, GENERATE) and audio/modulation controls for Project 25.
Covers BER Meter, Clear Scope, Voice Frame Decode, and test patterns for Project 25.
Steps to configure the analyzer for Project 25 radio testing in Monitor and Generate modes.
Procedures for testing Project 25 radio voice and embedded data transmissions.
Covers BER testing for Project 25 receivers and transmitters.
Using Clear Scope to monitor received and transmitted audio signals.
Introduction to the R2670/R2625 analyzer's Project 25 Trunking Option.
Lists Project 25 Trunking capabilities including signal generation, reception, and test protocols.
Details the connectors on the R2670 for Project 25 Trunking, including KVL and interface ports.
Covers manual scope, basic operation, software versions, and connecting radios for Project 25 Trunking.
Steps for accessing trunk mode and performing Registration/Call Alert, Dispatch Voice tests.
Details RF Zone, Audio Zone, BASE, and BER test parameters for Project 25 Trunking.
Information on test setups for Project 25 trunked radios.
Procedures for accessing Proj 25 Trunk mode and configuring encryption settings.
Covers Registration/Call Alert, Dispatch Voice, BASE, and BER tests for Project 25 Trunking.
To Next Page