GPT-10000 Series User Manual
148
It means one signal output of TEST
PIN will be delivered to each step
with continuous counters within
each interval between each step,
which is particularly practical for
certain applications.
Further press the UP/DOWN
arrow soft-keys to move the cursor
to the PASS & FAIL PIN STATUS
followed by using the scroll wheel
to select the following 2 options for
PASS & FAIL PINs under AUTO
test mode.
Pass & Fail
judgment in
final step
Regardless of judgments of each
step in an AUTO test, a PASS or
FAIL will be given after the whole
steps are completed. However, an
AUTO test will be stopped in the
mid way when F.S is activated.
Refer to page 117 for details.
Pass & Fail
judgment for
each step
Pass or Fail judgment will be given
for each step within an AUTO test.
By doing so, the judgments of each
step can be concretely recognized,
individually for user.