H3C MSR810 - Display L2 Tp Session Temporary

103
<Sysname> display l2tp session statistics
Total number of sessions: 1
# Display information about L2TP sessions.
<Sysname> display l2tp session
LocalSID RemoteSID LocalTID State
89 36245 10878 Established
Table 19 Command output
Field
Description
LocalSID Local session ID.
RemoteSID Remote session ID.
LocalTID Local tunnel ID.
State
Session state:
• Idle.
• Wait-tunnel—Waits for the tunnel to be established.
• Wait-reply—Waits for an Incoming-Call-Reply (ICRP) message indicating the call is
accepted.
• Wait-connect—Waits for an Incoming-Call-Connected (ICCN) message.
• Established.
display l2tp session temporary
Use display l2tp session temporary to display information about temporary L2TP sessions.
Syntax
display l2tp session temporary
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display information about temporary L2TP sessions.
<Sysname> display l2tp session temporary
Total number of temporary sessions: 6
LocalSID RemoteSID LocalTID State
2298 0 19699 Wait-tunnel
42805 0 19699 Wait-tunnel
17777 0 19699 Wait-tunnel
58284 0 19699 Wait-tunnel
33256 0 19699 Wait-tunnel
8228 0 19699 Wait-tunnel