H3C MSR810 - Display Fr Inarp

325
DLCI Interface Type Size (byte) In/Out/Dropped
200 Serial2/1/0 FRF12(end-to-end) 80 0/0/0
# Display FRF.12 fragmentation statistics for the VC with DLCI 200 on interface Serial 2/1/0.
<Sysname> display fr fragment interface serial2/1/0 dlci 200
Type: FRF12(end-to-end)
Size: 80 bytes
Pre-fragment:
Output: 0 packets, 0 bytes
Fragmented:
Input: 0 packets, 0 bytes
Output: 0 packets, 0 bytes
Assembled:
Input: 0 packets, 0 bytes
Dropped:
Input: 0 packets, 0 bytes
Output: 0 packets, 0 bytes
Out-of-sequence packets: 0
Table 61 Command output
Field
Description
Size (byte) Fragment size in bytes.
In/Out/Dropped Numbers of fragments received/sent/dropped.
Size Fragment size in bytes.
Pre-fragment Number of packets to be fragmented.
Fragmented Number of fragments.
Assembled Number of fragments reassembled.
Dropped Number of fragments dropped.
Out-of-sequence packets Number of out-of-sequence fragments.
Output: 0 packets, 0 bytes
Number of packets or fragments sent, and number of
bytes sent.
Input: 0 packets, 0 bytes
Number of fragments received, and number of bytes
received.
display fr inarp
Use display fr inarp to display statistics for Frame Relay InARP packets.
Syntax
display fr inarp [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator