H3C MSR810 - Authentication-Mode

273
undo attach-format imsi-sn split
Default
No separator is specified for the IMSI/SN binding authentication information.
Views
4G modem profile view
Predefined user roles
network-admin
Parameters
split splitchart: Specifies a separator. It can be a letter, a digit, or a sign such as a percent sign (%) or
a pound sign (#).
Usage guidelines
If IMSI/SN binding authentication is enabled, the IMSI/SN information is included in the
authentication information in addition to the username. You need t o configure a s eparator to
separate different types of information. For example, if you specify the separator as #, the
authentication information will be sent in the imsiinfo#sninfo#username format.
Examples
# Configure the pound sign (#) as the separator for the IMSI/SN binding authentication information.
<Sysname> system-view
[Sysname] apn-profile test
[Sysname-apn-profile-test] attach-format imsi-sn split #
Related commands
apn-profile
authentication-mode
Use authentication-mode to specify an authentication mode.
Use undo authentication-mode to restore the default.
Syntax
authentication-mode { pap | chap| pap-chap } user user-name password { cipher |
simple } string
undo authentication-mode
Default
No authentication mode is specified.
Views
4G modem profile view
Predefined user roles
network-admin
Parameters
chap: Specifies CHAP authentication.
pap: Specifies PAP authentication.
pap-chap: Specifies CHAP or PAP authentication.