H3C MSR810 - Display Pppoe-Server Va-Pool

71
Total 3 client MACs:
Interface Remote MAC Start time Remaining time(s)
GE1/0/1 00e0-1500-4100 2010-12-01,12:10:30 55
GE1/0/1 00e0-1500-4000 2010-12-01,12:10:40 65
GE1/0/1 00e0-1500-3300 2010-12-01,12:10:50 75
Table 12 Command output
Field
Description
Interface Interface at which the user is blocked.
Remote MAC MAC address of the user.
Start time Time to start blocking users.
Remaining time(s) Time left for blocking users, in seconds.
Related commands
pppoe-server throttle per-mac
display pppoe-server va-pool
Use display pppoe-server va-pool to display information about VA pools.
Syntax
display pppoe-server va-pool
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# (Centralized devices in standalone mode.) Display information about VA pools.
<Sysname> display pppoe-server va-pool
VT interface Size Unused/State
Virtual-Template1 1000 900
Virtual-Template2 1000 Creating
# (Distributed devices in standalone mode.) Display information about VA pools.
<Sysname> display pppoe-server va-pool
Location VT interface Size Unused/State
Virtual-Template1 1000 900
1/* Virtual-Template2 1000 1000