H3C MSR810 - Ppp Callback Ntstring; Reset Counters Interface

311
ppp callback ntstring
Use ppp callback ntstring to specify a dial string for a Windows server to call back.
Use undo ppp callback ntstring to restore the default.
Syntax
ppp callback ntstring dial-number
undo ppp callback ntstring
Default
No callback dial string is specified.
Views
Dialup interface view
Predefined user roles
network-admin
Parameters
dial-number: Specifies the dial string, a case-sensitive string of 1 to 64 characters.
Usage guidelines
Configure this command on the callback client if the Windows server requires PPP callback clients to
send callback numbers.
Examples
# Specify a dial string of 1234567 for the Windows server to call back.
<Sysname> system-view
[Sysname] interface dialer 1
[Sysname-Dialer1] ppp callback ntstring 1234567
reset counters interface
Use reset counters interface to clear the statistics of a dialer interface.
Syntax
reset counters interface [ dialer [ interface-number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
dialer: Specifies dialer interfaces.
interface-number: Specifies a dialer interface by its number.
Usage guidelines
Use this command to clear history statistics if you want to collect traffic statistics for a specific time
period.
If you do not specify the dialer keyword, this command clears statistics for all interfaces.
If you specify the dialer keyword, this command clears statistics for all dialer interfaces.