H3C MSR810 - Mfr Fragment Enable; Mfr Fragment Size

366
mfr fragment enable
Use mfr fragment enable to enable fragmentation on an MFR interface.
Use undo mfr fragment enable to disable fragmentation on an MFR interface.
Syntax
mfr fragment enable
undo mfr fragment enable
Default
Fragmentation is disabled on an MFR interface.
Views
MFR interface view
Predefined user roles
network-admin
Usage guidelines
With fragmentation enabled, an MFR interface fragments packets larger than the set fragment size
and sends the fragments over bundle links in a round robin manner. The receiving end reassembles
the fragments.
Examples
# Enable fragmentation on interface MFR 0/0/2.
<Sysname> system-view
[Sysname] interface mfr 0/0/2
[Sysname-MFR0/0/2] mfr fragment enable
Related commands
display mfr
mfr fragment size
Use mfr fragment size to set the maximum fragment size allowed on an MFR interface.
Use undo mfr fragment size to restore the default.
Syntax
mfr fragment size size
undo mfr fragment size
Default
The maximum fragment size allowed on an MFR interface is 300 bytes.
Views
MFR interface view
Predefined user roles
network-admin
Parameters
size: Specifies the fragment size in the range of 60 to 1500 bytes.