H3C MSR810 - Ppp Lcp Sn Accept; Ppp Lcp Sn Request

116
Examples
# Configure the IMSI information as imsi1 on the client.
<Sysname> system-view
[Sysname] interface serial 2/1/0:0
[Sysname-Serial2/1/0:0] ppp lcp imsi string imsi1
# Configure the IMSI information as imsi1 on the LAC.
<Sysname> system-view
[Sysname] interface virtual-ppp 1
[Sysname-Virtual-PPP1] ppp lcp imsi string imsi1
Related commands
ppp lcp imsi accept
ppp lcp imsi request
ppp lcp sn accept
Use ppp lcp sn accept to enable the client/LAC to accept the SN binding authentication requests
from the LNS.
Use undo ppp lcp sn accept to restore the default.
Syntax
ppp lcp sn accept
undo ppp lcp sn accept
Default
The client/LAC declines the SN binding authentication requests from the LNS.
Views
Interface view
Predefined user roles
network-admin
Examples
# Enable the client to accept the SN binding authentication requests from the LNS.
<Sysname> system-view
[Sysname] interface serial 2/1/0:0
[Sysname-Serial2/1/0:0] ppp lcp sn accept
# Enable the LAC to accept the SN binding authentication requests from the LNS.
<Sysname> system-view
[Sysname] interface virtual-ppp 1
[Sysname-Virtual-PPP1] ppp lcp sn accept
Related commands
ppp lcp sn request
ppp lcp sn string
ppp lcp sn request
Use ppp lcp sn request to enable the LNS to initiate SN binding authentication requests.