58
reassembles the fragments. If they have not all arrived, the system discards all received fragments to
release the buffer space.
Examples
# Set the timer for MP to wait for the expected fragment to 20 seconds on MP-group 2/0/0.
<Sysname> system-view
[Sysname] interface mp-group 2/0/0
[Sysname-MP-group2/0/0] ppp mp timer lost-fragment 20
ppp mp user
Use ppp mp user to associate a username with a VT interface.
Use undo ppp mp user to remove the association.
Syntax
ppp mp user username bind virtual-template number
undo ppp mp user username
Default
No username is associated with a VT interface.
Views
System view
Predefined user roles
network-admin
Parameters
username: Specifies a username, a case-sensitive string of 1 to 80 characters.
bind virtual-template number: Specifies a VT interface by its number.
The following matrix shows the value ranges for the number argument:
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM-HK/810-W-LM-H
K/810-LMS/810-LUS
0 to 1023
MSR2600-10-X1 0 to 1023
MSR 2630 0 to 1023
MSR3600-28/3600-51 0 to 1023
MSR3600-28-SI/3600-51-SI 0 to 1023
MSR 3610 0 to 1023
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC 0 to 2047
MSR 3620/3620-DP/3640/3660 0 to 2047
MSR5620/5660/5680 0 to 4095
Usage guidelines
This command associates a username with a VT interface. After the user passes authentication, the
system uses the settings on the VT interface to create an MP bundle and a VA interface to transmit
data.
To Next Page
Loading...
