229
Default
The transmission priorities of the UBR service, VBR-NRT service, and VBR-RT service are 0, 5, and
8, respectively.
Views
PVC view
PVC view in a PVC-group
Predefined user roles
network-admin
Parameters
priority: Specifies the transmission priority in the range of 0 to 9. A higher value indicates a higher
priority. Priorities 0 to 4 are for the UBR service, 5 to 7 are for the VBR-NRT service, and 8 to 9 are for
the VBR-RT service.
Usage guidelines
PVCs with higher priorities occupy more bandwidths. PVCs with the same priority occupy the same
bandwidth.
If you change the service type of a PVC, the transmission priority of the PVC is restored to the
default.
Examples
# Set the transmission priority for PVC 1/32 of ATM 2/4/0 to 3.
<Sysname> system-view
[Sysname] interface atm 2/4/0
[Sysname-ATM2/4/0] pvc 1/32
[Sysname-ATM2/4/0-pvc-1/32] transmit-priority 3
# Set the transmission priority for PVC 1/101 in PVC-group 1 to 4.
<Sysname> system-view
[Sysname] interface atm 2/4/0
[Sysname-ATM2/4/0] pvc-group 1
[Sysname-ATM2/4/0-pvc-group-1] pvc aa 1/101
[Sysname-ATM2/4/0-pvc-group-1-pvc-aa-1/101] transmit-priority 4
vp limit
Use vp limit to configure parameters for VP policing.
Use undo vp limit to restore the default.
Syntax
vp limit vpi scr
undo vp limit vpi
Default
VP policing is disabled.
Views
ATM interface view
Predefined user roles
network-admin
To Next Page
Loading...
