H3C MSR810 - Reset Counters Controller Cellular; Rssi

261
plmn search
reset counters controller cellular
Use reset counters controller cellular to clear statistics for a cellular interface.
Syntax
reset counters controller cellular [ interface-number ]
Views
User view
Predefined user roles
network-admin
Parameters
interface-number: Specifies a cellular interface by its number. If you do not specify this argument,
this command clears statistics for all cellular interfaces.
Usage guidelines
To collect traffic statistics on an i nterface during a period of time, first use the reset counters
controller cellular command to clear the existing statistics on the interface.
Examples
# Clear statistics for Cellular 2/4/0.
<Sysname> reset counters controller cellular 2/4/0
Related commands
display controller cellular
rssi
Use rssi to set the RSSI thresholds for a 3G/4G modem.
Use undo rssi to restore the default.
Syntax
rssi { 1xrtt | evdo | gsm | lte } { low lowthreshold | medium mediumthreshold } *
undo rssi { 1xrtt | evdo | gsm | lte } [ low | medium ]
Default
The lower and upper RSSI thresholds for a 3G/4G modem are –150 dBm and 0 dBm, respectively.
Views
Cellular interface view
Predefined user roles
network-admin
Parameters
1xrtt: Specifies the 1xRTT mode.
evdo: Specifies the EVDO mode.
gsm: Specifies the GSM mode.
lte: Specifies the LTE mode.