H3C MSR810 - Eth-Channel

279
Field
Description
Link: ADM - administratively down;
Stby - standby
Explains the
Link
field values:
• ADM—The interface has been shut down by the network
administrator. To recover its physical layer state, execute the
undo shutdown command.
• Stby—The interface is a standby interface. To view the primary
interface information, execute the display interface-backup
state command.
Protocol: (s) - spoofing
Explains the
Protocol
field value.
(s)
represents spoofing. If the data link layer protocol of an interface
is up but its link is an on-demand link or not present at all, the
Protocol
field displays
UP(s)
.
Interface Interface name.
Link
Physical state of the interface:
• UP—The interface is up.
• DOWN—The interface is physically down.
• ADM—The interface has been administratively shut down. To
recover its physical state, execute the undo shutdown
command.
• Stby—The interface is a standby interface.
Protocol
Data link layer protocol state of the interface:
• UP.
• DOWN.
• UP(s)—The data link layer protocol state of the interface is up
but the link is an on-demand link or not present at all.
Main IP Main IP address of the interface.
Description
Interface description configured by using the
description
command.
If the
description
keyword is not specified in the
display interface
brief
command, the
Description
field displays the first 27 characters
of the interface description. If the
description
keyword is specified in
the
display interface brief
command, this field displays the
complete interface description.
Cause
Cause of the interface down event. If the interface has been shut
down by using the
shutdown
command, this field displays
Administratively
. To restore the physical state of the interface,
execute the
undo shutdown
command.
eth-channel
Use eth-channel to channelize a cellular interface into an Eth-channel interface.
Use undo eth-channel to remove the Eth-channel interface channelized from a cellular interface.
Syntax
eth-channel channel-number
undo eth-channel channel-number
Views
Cellular interface view
Predefined user roles
network-admin