H3C MSR810 - Bundle Min-Active Bandwidth; Bundle Min-Active Links

140
Default
The bundling priority value of an HDLC-enabled interface is 32768.
Views
POS interface view
Serial interface view
Predefined user roles
network-admin
Parameters
priority: Specifies the bundling priority value of an HDLC-enabled interface. The value range for this
argument is 1 to 65535. A higher priority value means a lower bundling priority.
Examples
# Set the bundling priority value to 1 for HDLC-enabled interface POS 2/2/0.
<Sysname> system-view
[Sysname] interface pos 2/2/0
[Sysname-Pos2/2/0] bundle member-priority 1
bundle min-active bandwidth
Use bundle min-active bandwidth to set the minimum bandwidth required for bringing up an HDLC
link bundle interface.
Use undo bundle min-active bandwidth to restore the default.
Syntax
bundle min-active bandwidth bandwidth
undo bundle min-active bandwidth
Default
The minimum bandwidth required for bringing up an HDLC link bundle is not set.
Views
HDLC link bundle interface view
Predefined user roles
network-admin
Parameters
bandwidth: Specifies the minimum bandwidth (in kbps) required for bringing up an HDLC link bundle
interface. The value range for this argument is 64 to 1342177280.
Examples
# Set the minimum bandwidth required for bringing up HDLC link bundle 1 to 1000 kbps.
<Sysname> system-view
[Sysname] interface hdlc-bundle 1
[Sysname-HDLC-bundle1] bundle min-active bandwidth 1000
bundle min-active links
Use bundle min-active links to set the minimum number of Selected interfaces required for
bringing up an HDLC link bundle interface.