H3C MSR810 - Reset Counters Interface; Service

149
Examples
# Set the MTU size of HDLC link bundle interface 1 to 1430 bytes.
<Sysname> system-view
[Sysname] interface hdlc-bundle 1
[Sysname-HDLC-bundle1] mtu 1430
reset counters interface
Use reset counters interface to clear the statistics of an HDLC link bundle interface.
Syntax
reset counters interface [ hdlc-bundle [ bundle-id ] ]
Views
User view
Predefined user roles
network-admin
Parameters
bundle-id: Specifies an HDLC link bundle interface by its number in the range of 1 to 10.
Usage guidelines
Before collecting traffic statistics within a period of time on an interface, you must clear the existing
statistics.
If you do not specify hdlc-bundle, this command clears the statistics of all interfaces.
If you specify hdlc-bundle but not bundle-id, this command clears the statistics of all HDLC link
bundle interfaces.
If you specify both hdlc-bundle and bundle-id, this command clears the statistics of the specified
HDLC link bundle interface.
Examples
# Clear the statistics of HDLC link bundle interface 1.
<Sysname> reset counters interface hdlc-bundle 1
Related commands
display interface hdlc-bundle
service
Use service to specify a primary traffic processing slot for an interface.
Use undo service to restore the default.
Syntax
Distributed devices in standalone mode/centralized devices in IRF mode:
service slot slot-number
undo service slot
Distributed devices in IRF mode:
service chassis chassis-number slot slot-number
undo service chassis