H3C MSR810 - Display Atm Pvc-Info

202
Field
Description
PVC State
PVC state:
• UP—The following states are up:
 State of the ATM interface to which the PVC belongs.
 Shutdown state.
 OAM state.
• DOWN—One or more of the following states is down:
 State of the ATM interface to which the PVC belongs.
 Shutdown state.
 OAM state.
Input: 0 packets, 0 bytes, 0 errors Counts of received packets, bytes, and packet errors.
Output: 0 packets, 0 bytes, 0 errors Counts of transmitted packets, bytes, and packet errors.
Output queue QoS packet output queue information of the PVC.
OAM cells received Number of received OAM cells.
F5 Loopback Number of received F5 Loopback cells.
F5 AIS
Number of received AIS cells.
If the AIS alarm state is not supported, this command displays only
the number of AIS cells, rather than the AIS alarm state in the
OAM
AIS State
field.
F5 RDI
Number of received RDI cells.
If the RDI alarm state is not supported, this command displays only
the number of RDI cells, rather than the RDI alarm state in the
OAM
RDI State
field.
OAM cells sent Number of transmitted OAM cells.
F5 Loopback Number of transmitted F5 Loopback cells.
OAM cell drops Number of dropped OAM cells.
display atm pvc-info
Use display atm pvc-info to display PVC information.
Syntax
display atm pvc-info [ interface interface-type { interface-number | interface-number.subnumber }
[ pvc { pvc-name | vpi/vci } ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type { interface-number | interface-number.subnumber }: Specifies an interface
by its type and number. Both ATM interfaces and ATM subinterfaces are supported.
pvc: Displays information about a PVC.
pvc-name: Specifies a PVC by its name, a c ase-sensitive string of 1 t o 15 c haracters, excluding
slashes (/) and hyphens (-). For example, neither 1/20 nor a-b is a valid PVC name.