H3C MSR810 - Display L2 Tp Va-Pool; Interface Virtual-Ppp

105
Field
Description
Sessions Number of sessions within the tunnel.
RemoteAddress IP address of the peer.
RemotePort UDP port number of the peer.
RemoteName Name of the tunnel peer.
Related commands
reset l2tp tunnel
display l2tp va-pool
Use display l2tp va-pool to display information about L2TP VA pools.
Syntax
display l2tp va-pool
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display information about L2TP VA pools.
<Sysname> display l2tp va-pool
VT interface Size Unused State
Virtual-Template1 1000 900 Normal
Table 22 Command output
Field
Description
VT interface VT interface that uses the VA pool.
Size VA pool capacity set for L2TP users.
Unused VA pool capacity available for L2TP users.
State
Current state of the VA pool:
• Creating—The VA pool is being created.
• Destroying—The VA pool is being removed.
• Normal—The VA pool has been created.
Related commands
l2tp virtual-template va-pool
interface virtual-ppp
Use interface virtual-ppp to create a virtual PPP interface and enter its view, or enter the view of an
existing virtual PPP interface.
Use undo interface virtual-ppp to delete a virtual PPP interface.