H3C MSR810 - Description

35
Predefined user roles
network-admin
Usage guidelines
CAUTION:
The default
command might interrupt ongoing network services. Make sure you are fully aware of
the impact of this command before using it on a live network.
This command might fail to restore the default settings for some commands for reasons such as
command dependencies or system restrictions. Use the display this command in interface view to
identify these commands. Use the undo forms of these commands or follow the command reference
to individually restore their default settings. If your restoration attempt still fails, follow the error
message instructions to resolve the problem.
Examples
# Restore the default settings of Virtual-Template 10.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10] default
# Restore the default settings of MP-group 2/0/0.
<Sysname> system-view
[Sysname] interface mp-group 2/0/0
[Sysname-Mp-group2/0/0] default
description
Use description to set the description for a VT or MP-group interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description for a V T or MP-group interface is interface name Interface (for
example, Virtual-Template1 Interface or MP-group2/0/0 Interface).
Views
VT interface view
MP-group interface view
Predefined user roles
network-admin
Parameters
text: Specifies the interface description, a case-sensitive string of 1 to 255 characters.
Examples
# Set the description for Virtual-Template 10 to virtual-interface.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10] description virtual-interface