H3C MSR810 - Display Ppp Access-User

3
Field
Description
In use IP addresses Information about the IP addresses that have been assigned.
Interface Local interface that requests the IP address for the peer interface.
Related commands
ip pool
display ppp access-user
Use display ppp access-user to display PPP user information.
Syntax
display ppp access-user { interface interface-type interface-number [ count ]
| ip-address ip-address | ipv6-address ipv6-address | username user-name | user-type { lac | lns
| pppoa | pppoe } [ count ] }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Displays brief information about PPP users on the
specified interface.
count: Displays the total number of PPP users that match the specified criteria.
ip-address ip-address: Displays detailed information about the PPP user specified by its IP address.
ipv6-address ipv6-address: Displays detailed information about the PPP user specified by its IPv6
address.
username user-name: Displays detailed information about the PPP user specified by its username,
a case-sensitive string of 1 to 80 characters.
user-type: Displays brief information about online users of the specified type.
lac: Displays brief information about L2TP users for an LAC.
lns: Displays brief information about L2TP users for an LNS.
pppoa: Displays brief information about PPPoA users.
pppoe: Displays brief information about PPPoE users.
Usage guidelines
Brief information about a PPP user includes the following:
• Brief name of the VA interface.
• Username.
• MAC address.
• IPv4 address, IPv6 address, or IPv6 prefix of the PPP user.
Detailed information about a PPP user includes the following:
• Brief name of the VA interface.
• User ID.