H3C MSR810 - Page 14

2
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
pool-name: Specifies a PPP address pool by its name, a case-sensitive string of 1 to 31 characters.
group group-name: Displays PPP address pools in a group specified by its name, a case-sensitive
string of 1 to 31 characters.
Usage guidelines
If you do not specify any parameters, the command displays brief information about all PPP address
pools.
If you specify an address pool, the command displays detailed information about the specified PPP
address pool.
Examples
# Display brief information about all PPP address pools.
<Sysname> display ip pool
Group name: a
Pool name Start IP address End IP address Free In use
aaa1 1.1.1.1 1.1.1.5 5 0
aaa2 1.1.1.6 1.1.1.10 5 0
Group name: b
Pool name Start IP address End IP address Free In use
bbb 1.1.2.1 1.1.2.5 4 1
2.2.2.1 2.2.2.5 5 0
# Display brief information about the PPP address pools in group a.
<Sysname> display ip pool group a
Group name: a
Pool name Start IP address End IP address Free In use
aaa1 1.1.1.1 1.1.1.5 5 0
aaa2 1.1.1.6 1.1.1.10 5 0
# Display detailed information about PPP address pool bbb.
<Sysname> display ip pool bbb
Group name: b
Pool name Start IP address End IP address Free In use
bbb 1.1.2.1 1.1.2.5 4 1
2.2.2.1 2.2.2.5 5 0
In use IP addresses:
IP address Interface
1.1.2.1 POS2/2/0
Table 1 Command output
Field
Description
Free Number of free IP addresses.
In use Number of IP addresses that have been assigned.