47
Parameters
number: Specifies a VT interface by its number.
The following matrix shows the value ranges for the number argument:
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM-HK/810-W-LM-H
K/810-LMS/810-LUS
0 to 1023
MSR2600-10-X1 0 to 1023
MSR 2630 0 to 1023
MSR3600-28/3600-51 0 to 1023
MSR3600-28-SI/3600-51-SI 0 to 1023
MSR 3610 0 to 1023
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC 0 to 2047
MSR 3620/3620-DP/3640/3660 0 to 2047
MSR5620/5660/5680 0 to 4095
Usage guidelines
To remove a VT interface, make sure all the corresponding VA interfaces are removed and the VT
interface is not in use.
Examples
# Create interface Virtual-Template 10.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10]
mtu
Use mtu to set the MTU size of an interface.
Use undo mtu to restore the default.
Syntax
mtu size
undo mtu
Default
The MTU size of an interface is 1500 bytes.
Views
VT interface view
MP-group interface view
Predefined user roles
network-admin
Parameters
size: Specifies the MTU size in the range of 128 to 1500 bytes.
To Next Page
Loading...
