285
Usage guidelines
Use this command to clear history statistics if you want to collect traffic statistics for a specific period.
• If you do not specify an interface type, the command clears statistics on all interfaces.
• If you specify the eth-channel keyword without specifying the channel ID, the command clears
statistics on all Eth-channel interfaces.
• If you specify both the eth-channel keyword and the channel ID, the command clears statistics
on the specified Eth-channel interface.
Examples
# Clear the statistics on Eth-channel 2/4/0:0.
<Sysname> reset counters interface eth-channel 2/4/0:0
shutdown
Use shutdown to shut down an Eth-channel interface.
Use undo shutdown to bring up an Eth-channel interface.
Syntax
shutdown
undo shutdown
Default
An Eth-channel interface is up.
Views
Eth-channel interface view
Predefined user roles
network-admin
Examples
# Shut down Eth-channel 2/4/0:0.
<Sysname> system-view
[Sysname] interface eth-channel 2/4/0:0
[Sysname-Eth-channel2/4/0:0] shutdown
To Next Page
Loading...
