H3C MSR810 - Modem Management Commands; Country-Code

231
Modem management commands
This feature is supported only on the following interface modules and interfaces:
• AM interface modules.
• ASE interface modules.
• AUX interfaces.
• SAE interface modules that are operating in asynchronous mode.
country-code
Use country-code to set the modem country code on an AM interface.
Use undo country-code to restore the default.
Syntax
country-code area-name
undo country-code
Default
The country code is united-states.
Views
AM interface view
Predefined user roles
network-admin
Parameters
area-name: Specifies a country code. The following are available country codes:
australia france korea russia
austria germany luxembourg singapore
belgium greece malaysia southafrica
brazil hongkong mexico spain
bulgaria hungary netherlands sweden
canada india new-zealand switzerland
china ireland norway taiwan
czechoslovakia israel philippines united-kingdom
denmark italy poland united-states
finland japan portugal
Usage guidelines
CAUTION:
Executing this command disconnects the modem connection that has been established on the
interface.