H3C MSR810 - Display Controller Cellular

251
Field
Description
PIN Verification
PIN authentication status:
• Disabled.
• Enabled.
• Unknown.
PIN Status
PIN status:
• Ready—The SIM card is ready.
• PIN Requirement—Requires you to execute the pin verify command to
enter the PIN for PIN verification.
• PUK Requirement—Requires you to execute the pin unlock command
to unlock the SIM or UIM card.
SIM Status
SIM card status:
• OK—The SIM card is normal.
• Network Reject—The SIM card is denied access to the network. The
cellular interface is not available.
• Not Insert—The SIM card is absent. The cellular interface is not
available.
• Not Initialized—The SIM card status cannot be identified.
ICCID ID of the SIM card, displayed only when the SIM card status is
OK
.
Related commands
mode
pin modify
pin unlock
pin verification enable
pin verify
plmn select
profile create
display controller cellular
Use display controller cellular to display information about a cellular interface.
Syntax
display controller [ cellular [ interface-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-number: Specifies a cellular interface by its number.
Usage guidelines
If you do not specify the cellular keyword, the command displays information about all interfaces of
the device.