H3C MSR810 - Display L2 Tp Tunnel

104
Table 20 Command output
Field
Description
LocalSID Local session ID.
RemoteSID Remote session ID.
LocalTID Local tunnel ID.
State
Session state:
• Idle.
• Wait-tunnel—Waits for the tunnel to be established.
• Wait-reply—Waits for an ICRP message.
• Wait-connect—Waits for an ICCN message.
display l2tp tunnel
Use display l2tp tunnel to display information about L2TP tunnels.
Syntax
display l2tp tunnel [ statistics ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
statistics: Displays statistics for L2TP tunnels.
Examples
# Display statistics for L2TP tunnels.
<Sysname> display l2tp tunnel statistics
Total number of tunnels: 1
# Display information about L2TP tunnels.
<Sysname> display l2tp tunnel
LocalTID RemoteTID State Sessions RemoteAddress RemotePort RemoteName
10878 21 Established 1 20.1.1.2 1701 lns
Table 21 Command output
Field
Description
LocalTID Local tunnel ID.
RemoteTID Remote tunnel ID.
State
Tunnel state:
• Idle.
• Wait-reply.
• Wait-connect.
• Established.
• Stopping.