120
Views
VT interface view
Predefined user roles
network-admin
Parameters
imsi: Specifies IMSI information.
sn: Specifies SN information.
Examples
# Replace the client username with the IMSI information for authentication.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp user replace imsi
Related commands
ppp user accept-format imsi-sn split
ppp user attach-format imsi-sn split
reset counters interface virtual-ppp
Use reset counters interface virtual-ppp to clear the statistics for virtual PPP interfaces.
Syntax
reset counters interface [ virtual-ppp [ interface-number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
interface-number: Specifies a virtual PPP interface by its number in the range of 0 to 255.
Usage guidelines
Use this command to clear history statistics if you want to collect traffic statistics for a specific time
period.
If you specify neither virtual-ppp nor interface-number, this command clears the statistics for all
interfaces.
If you specify virtual-ppp but not interface-number, this command clears the statistics for all virtual
PPP interfaces.
If you specify both virtual-ppp and interface-number, this command clears the statistics for the
specified virtual PPP interface.
Examples
# Clear the statistics for Virtual-PPP 10.
<Sysname> reset counters interface virtual-ppp 10
To Next Page
Loading...
