254
Syntax
mode { 1xrtt | auto | evdo | gsm | gsm-precedence | hybrid | lte | td | td-precedence | wcdma
| wcdma-precedence }
Default
The default setting for this command depends on the modem model.
Views
Cellular interface view
Predefined user roles
network-admin
Parameters
1xrtt: Connects to a CDMA-1x RTT network only.
auto: Connects to a network automatically.
evdo: Connects to a CDMA-EVDO network only.
gsm: Connects to a GSM network only.
gsm-preference: Connects to a GSM network with preference.
hybrid: Connects to the CDMA-EVDO and CDMA-1xRTT networks only.
lte: Connects to an LTE network only.
td: Connects to a TD-SCDMA network only.
td-preference: Connects to a TD-SCDMA network with preference.
wcdma: Connects to a WCDMA network only.
wcdma-preference: Connects to a WCDMA network with preference.
Usage guidelines
The available parameters depend on the modem model.
Examples
# Specify the LTE service for the 4G modem.
<Sysname> system-view
[Sysname] controller cellular 2/4/0
[Sysname-Cellular2/4/0] mode lte
modem reboot
Use modem reboot to reboot a 3G/4G modem.
Syntax
modem reboot
Views
Cellular interface view
Predefined user roles
network-admin
Usage guidelines
A 3G/4G modem module can automatically detect running errors and reboot. If the 3G/4G modem
fails to reboot by itself, you can use this command to reboot it.
To Next Page
Loading...
