188
You cannot execute the command when a SPID negotiation is present on the interface.
Examples
# Set the maximum number of INFORMATION message retransmissions to 5 on BRI 2/4/0.
<Sysname> system-view
[Sysname] interface bri 2/4/0
[Sysname-Bri2/4/0] isdn spid resend 5
Related commands
isdn spid timer
isdn spid service
Use isdn spid service to specify services subscribed to by the device on an N I-enabled BRI
interface.
Use undo isdn spid service to specify any service types.
Syntax
isdn spid service [ audio | data | speech ]
undo isdn spid service
Default
During a dynamic SPID negotiation, the device chooses the SPID that includes both speech and
data services.
Views
ISDN BRI interface view
Predefined user roles
network-admin
Parameters
audio: Specifies the audio service.
data: Specifies the data service.
speech: Specifies the speech service.
Usage guidelines
The command is available only on NI-enabled BRI interfaces.
You can repeat the command to specify multiple services. To specify all the services, execute the
command without specifying any services.
If dynamic SPID negotiation is used, the service provider switch sends available SPIDs to the device.
The device selects the SPID that best suits its service configuration. For example, if you specify the
data service, the device preferentially selects the SPID that includes only the data service. If you
specify the audio and data services, the device preferentially selects the SPID that includes both
services.
For the device to accept a SPID that includes any service types, use the undo form of the command.
You cannot execute the command when a SPID negotiation is present on the interface.
Examples
# Specify the audio service on BRI 2/4/0.
<Sysname> system-view
[Sysname] interface bri 2/4/0
To Next Page
Loading...
