H3C MSR810 - Page 290

278
Field
Description
Output queue - Urgent queuing:
Size/Length/Discards
Packet statistics for urgent queuing in the output queue of the
interface:
• Size—Current number of packets in the queue.
• Length—Maximum number of packets that can stay in the
queue.
• Discards—Number of dropped packets.
Output queue - Protocol queuing:
Size/Length/Discards
Packet statistics for protocol queuing in the output queue of the
interface:
• Size—Current number of packets in the queue.
• Length—Maximum number of packets that can stay in the
queue.
• Discards—Number of dropped packets.
Output queue - FIFO queuing:
Size/Length/Discards
Packet statistics for FIFO queuing in the output queue of the
interface:
• Size—Current number of packets in the queue.
• Length—Maximum number of packets that can stay in the
queue.
• Discards—Number of dropped packets.
Last link flapping
The amount of time that has elapsed since the most recent physical
state change of the interface. This field displays
Never
if the interface
has been physically down since device startup.
Last clearing of counters
Time when statistics on the logical interface were last cleared by
using the
reset counters interface
command.
If the statistics of the interface have never been cleared by using the
reset counters interface
command since the device started, this
field displays
Never
.
Last 300 seconds input rate
Average input rate during the last 300 seconds:
• bytes/sec—Average number of received bytes per second.
• bits/sec—Average number of received bits per second.
• packets/sec—Average number of received packets per
second.
Last 300 seconds output rate
Average output rate over the last 300 seconds:
• bytes/sec—Average number of sent bytes per second.
• bits/sec—Average number of sent bits per second.
• packets/sec—Average number of sent packets per second.
Input: 0 packets, 0 bytes, 0 buffers
Incoming packet statistics:
• 0 packets—Packet number.
• 0 bytes—Packet size in bytes.
• 0 buffers—Number of buffered units.
Output: 0 packets, 0 bytes
Outgoing packet statistics:
• 0 packets—Packet number.
• 0 bytes—Packet size in bytes.
Brief information on interface(s)
under route mode:
Brief information about Layer 3 interfaces.