EasyManua.ls Logo

H3C MSR810 - Page 211

H3C MSR810
389 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
199
Table 40 Command output
Field
Description
ATM2/4/0, State UP
Name of the interface to which the PVC-groups belong, and the physical and
administrative states of the interface.
State of an interface (not a subinterface):
UPThe interface is both physically and administratively up.
DOWNThe interface is in either of the following states:
The interface is administratively up but physically down (probably
because no physical link is available or the link has failed).
The interface is administratively down (shut down by using
the shutdown command).
State of a subinterface:
UPThe interface is administratively up. The parent interface is both
physically and administratively up.
DOWNThe interface or its parent interface was shut down by using
the shutdown command, or the parent interface is physically down.
Encapsulation
AAL5 encapsulation type of the PVC-group. It can only be SNAP, which is the
Logical Link Control (LLC)/Subnet Access Protocol (SNAP) encapsulation type.
Protocol
Upper-layer protocol running on the PVC-group:
PPPPPP protocol.
IPIP protocol.
ETHEthernet protocol.
NoneNo protocol is configured.
PVC name PVC name.
N/A
means no PVC name.
Precedence
Priority of the IP packets carried by the PVC in the PVC-group:
DefaultDefault PVC. IP packets without a priority configured are
transmitted through the default PVC.
a-bLowest and highest priorities of the IP packets carried by the PVC.
The value range for a and b is 0 to 7. a is smaller than b.
cPriority of the IP packets carried by the PVC, in the range of 0 to 7.
-No priority is configured for IP packets carried by the PVC.
State
PVC state:
UPThe following states are up:
State of the ATM interface to which the PVC belongs.
Shutdown state.
OAM state.
DOWNOne or more of the following states is down:
State of the ATM interface to which the PVC belongs.
Shutdown state.
OAM state.
# Display detailed information about the specified PVC-group.
<Sysname> display atm pvc-group interface atm 2/4/0 pvc-group 1
ATM2/4/0, PVC-group: 1
Encapsulation: SNAP, Protocol: None
PVC VPI/VCI: 0/34
Precedence: default
Service-type: CBR, Output-pcr: 200 kbps, CDVT: 500 us
Transmit-Priority: 0
OAM loopback interval: 0 sec(disabled), OAM loopback retry interval: 1 sec

Table of Contents

Other manuals for H3C MSR810

Related product manuals