EasyManua.ls Logo

H3C MSR810 - Page 216

H3C MSR810
389 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
204
Service-type: UBR, Output-pcr: 200 kbps
Transmit-Priority: 0
OAM loopback interval: 0 sec(disabled), OAM loopback retry interval: 1 sec
OAM loopback retry count (up/down): 3/5
OAM AIS-RDI count (up/down): 3/1
Interface State: UP, OAM State: UP, PVC State: UP
Input: 0 packets, 0 bytes, 0 errors
Output: 0 packets, 0 bytes, 0 errors
Output queue: (Urgent queuing : Size/Length/Discards) 0/100/0
Output queue: (Protocol queuing : Size/Length/Discards) 0/500/0
Output queue: (FIFO queuing : Size/Length/Discards) 0/75/0
OAM cells received: 42
F5 Loopback: 0, F5 AIS: 42, F5 RDI: 0
OAM cells sent: 0
F5 Loopback: 0
OAM cell drops: 0
Table 43 Command output
Field
Description
ATM2/4/1 Name of the interface to which the PVC belongs.
Encapsulation
AAL5 encapsulation type of the PVC:
SNAPLLC/SNAP encapsulation.
NLPIDRFC1490 encapsulation.
MUXMUX multiplexing encapsulation.
Protocol
Upper-layer protocol running on the PVC:
PPP—PPP protocol.
IPIP protocol.
ETHEthernet protocol.
NoneNo protocol is configured.
Service-type Services type:
CBR
,
UBR
,
VBR-NRT
, or
VBR-RT
.
Output-pcr Peak output rate of ATM cells.
OAM loopback interval Interval at which OAM F5 Loopback cells are sent.
OAM loopback retry interval
Interval at which OAM F5 Loopback retransmission detection cells are
sent.
OAM loopback retry count
(up/down)
Number of cells that are detected as up and down in OAM detection.
OAM AIS-RDI count (up/down)
Number of seconds that are detected as up in OAM AIS-RDI detection.
Number of cells that are detected as down in OAM AIS-RDI detection.

Table of Contents

Other manuals for H3C MSR810

Related product manuals